LG LP070HED1 Service Manual - Page 15
Air Handling Parts
![]() |
View all LG LP070HED1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
2.2 AIR HANDLING PARTS 2.2.1 HEATER ASSEMBLY AND CROSS FLOW FAN 1. Remove the front grille. (Refer to section 2.1.1) 2. Remove the control box assembly. (Refer to section 2.1.3) 3. Remove the 3 screws which fasten the net steel. (See Fig. 5) 4. Remove the 3 screws which fasten the electric heater assembly.(Electric heater model only) (See Fig.5). 5. Loosen the hexagon screw with the Hexwrench(See Fig.6) Figure 5 6. Remove the 4 screws which fasten the indoor motor and the earth wire. (See Fig. 6, 7) 7. Re-install the components by referring to the removal procedure, above. Figure 6 2.2.2 FAN 1. Remove the brace. 2. Remove the 4 screws which fasten the condenser with the shroud and the basepan. 3. Move the condenser sideways carefully. 4. Remove the clamp which secures the fan with plier. 5. Remove the fan. (See Fig. 8) 6. Re-install the components by referring to the removal procedure, above. Figure 7 Downloaded from www.Manualslib.com manuals search engine Figure 8 -15-
![](/manual_guide/products/lg-lp070hed1-service-manual-8185f34/15.png)