LG RC897T Owner's Manual (English) - Page 13

CONNECTION AND SETTING Controlling Your TV with the Supplied Multi-brand Remote Control You can control the sound level, input source, and power switch of your LG TV with the supplied Multi-brand Remote Control. You can control your TV using the buttons below. TV INPUT TV Control Buttons Controlling other TVs with the Multi-brand Remote Control You can control the sound level, input source, and power switch of non-LG TVs as well. If your TV is listed in the table below, set the appropriate manufacturer code. 1. While holding down TV POWER (1) button, press the number buttons to select the manufacturer code for your TV (Refer to table on the right column). 2. Release TV POWER (1) button. Code numbers of controllable TVs If more than one code number is listed, try entering them one at a time until you find the one that works with your TV. Manufacturer LG / GoldStar Zenith Samsung Sony Hitachi Code Number 1 (Default), 2 1, 3, 4 6, 7 8, 9 4 By pressing POWER INPUT CH +/- VOL +/- You can Turn the TV on or off. Switch the TV's input source between the TV and other input sources. Scans up or down through memorized channels. Adjust the volume of the TV. Notes Depending on your TV, some or all buttons may not function on the TV, even after entering the correct manufacturer code. If you enter a new code number, the code number previously entered will be erased. When you replace the batteries of the remote, the code number you have set may be reset to the default setting. Set the appropriate code number again. Note Depending on the unit being connected, you may not be able to control your TV using some of the buttons. 13