LG RC897T Owner's Manual (English) - Page 67

HDMI The connected HDMI b Try disconnecting then reconnecting the HDMI cable. device does not display b Try switching the power of the HDMI device off then back on. any picture. b The video input of the connected device is set correctly for this unit. b The HDMI cable you are using is fully HDMI-compliant. Using a non-standard cable may result in no picture being output. b Not all HDCP-compatible DVI devices will work with this unit. The connected HDMI device does not output sounds. b Some HDMI-compatible devices do not output sounds (check the manual that came with the connected device). b If your TV is not capable of handling 96 kHz sampling frequency, set the [Sampling Freq.] option to [48 kHz] on the setup menu. When this choice is made, this unit will automatically convert any 96 kHz signals to 48 kHz so your system can decode them. b If your TV is not equipped with Dolby Digital and MPEG decoder, set the [Dolby Digital] and [MPEG] options to [PCM] on the setup menu. b If your TV is not equipped with DTS decoder, set the [DTS] options to [OFF] on the setup menu. To enjoy DTS multi channel surround, you must connect this unit to a DTS compatible receiver via one of this unit's digital audio outputs. Resetting the unit If you observe any of the following symptoms. You can reset the unit as follows. b The unit is plugged in, but the power will not turn on or off. b The front panel display is not working. b The unit is not operating normally. b Press and hold the POWER (1) button for at least five seconds. This will force the unit to power off then turn the unit back on. b Unplug the power cord, wait at least five seconds, and then plug it in again. REFERENCE 67