LG RC897T Owner's Manual (English) - Page 61

Rear Panel a b c d e f gh ij k l a ANTENNA IN (FROM ANT.) Connect the antenna to this terminal. b OPTICAL (DIGITAL AUDIO OUTPUT) Connect to digital (optical) audio equipment. c COMPONENT OUTPUT (Y PB PR) Connect to a TV with Y PB PR inputs. d INPUT 1 (VIDEO/AUDIO (Left/Right)) Connect the audio/video output of an external source (Audio system, TV/Monitor, VCR, Camcorder). e HDMI OUTPUT HDMI output providing a high quality interface for digital audio and video. f AC Power Cord Plug into the power source. g ANTENNA OUT (TO TV) Connect to a TV with ANTENNA coaxial inputs h IR TRANSMITTER Connect the IR control cable (if used). i COAXIAL (DIGITAL AUDIO OUTPUT) Connect to digital (coaxial) audio equipment. j S-VIDEO OUTPUT Connect to a S-Video Input on TV. k AUDIO OUTPUT (Left/Right) Connect to a TV or other equipment with audio inputs. l VIDEO/AUDIO OUTPUT (Left/Right) Connect to a TV with video and audio inputs. Caution Do not touch the inner pins of the jacks on the rear panel. Electrostatic discharge may cause permanent damage to the unit. About the Remote Control Operation Range Point the Remote Control at the Remote Sensor and press the buttons. Distance: About 23 ft (7 m) from the front of the Remote Sensor. Angle: About 30° in each direction of the front of the Remote Sensor. Battery installation Remove the battery cover on the rear of the Remote Control, and insert R03 (size AAA) battery with 3 and # matched correctly. Do not mix old and new batteries and never mix different types of batteries such as standard, alkaline, etc. 61 REFERENCE