Lantronix EDS3000PS Command Reference - Page 51
Commands and Levels, EDS3000 Command Reference, <number>, <binary>, <text>
View all Lantronix EDS3000PS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
6: Commands and Levels default tcp keep alive probes Defaults the TCP keep alive probes. email connect Sets an email profile to use to send an email alert upon establishing an accept mode tunnel. = the number of the email profile to use. email disconnect Sets an email profile to use to send an email alert upon closing an accept mode tunnel. = the number of the email profile to use. exit Returns to the tunnel level. flush serial disable Characters already in the serial data buffer are retained upon establishing an accept mode tunneling connection. flush serial enable Flushes the serial data buffer upon establishing an accept mode tunneling connection. flush start character disable Enables forwarding of the accept start character into the network. flush start character enable Disables forwarding of the accept start character into the network. initial send binary Sets the accept tunnel Initial Send text allowing for binary characters. = string in binary format that will be sent out the network upon connection. Within [] use binary decimal up to 255 or hex up to 0xFF. initial send set Sets the accept tunnel Initial Send text. = ascii string that will be sent out the network upon connection. kill connection Disconnects the active accept mode tunneling connection. local port Sets the port to use for accept mode tunneling. = number of the port to use. no aes decrypt key Removes the accept tunnel AES decrypt key. no aes encrypt key Removes the accept tunnel AES encrypt key. no credentials Clears the RSA/DSA certificate selection for the SSL server. no email connect Discontinues sending email alerts upon establishing an accept mode tunnel. no email disconnect Discontinues sending email alerts upon closing an accept mode tunnel. no initial send Removes the accept tunnel Initial Send string. password Enters the next lower level. protocol ssh Uses SSH protocol for accept mode tunneling. protocol ssl Uses SSL protocol for accept mode tunneling. protocol tcp Uses TCP protocol for accept mode tunneling. protocol tcp aes Uses TCP protocol with AES encryption for accept mode tunneling. protocol telnet Uses Telnet protocol (with IAC) for accept mode tunneling. secure protocol ssl3 disable Disables the protocol. secure protocols ssl3 enable Enables the protocol. secure protocols tls1.0 disable Disables the protocol. secure protocols tls1.0 enable Enables the protocol. secure protocols tls1.1 disable Disables the protocol. secure protocols tls1.1 enable Enables the protocol. secure protocols tls1.2 disable Disables the protocol. EDS3000 Command Reference 51