Lantronix EDS3000PS Command Reference - Page 64
Commands and Levels, EDS3000 Command Reference, <text>, <milliseconds>, <number>
View all Lantronix EDS3000PS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 64 highlights
6: Commands and Levels protocol udp aes Uses UDP protocol with AES encryption for connect mode tunneling. secure protocols ssl3 disable Disables the protocol. secure protocols ssl3 enable Enables the protocol. secure protocols tls1.0 disable Disables the protocol. secure protocols tls1.0 enable Enables the protocol. secure protocols tls1.1 disable Disables the protocol. secure protocols tls1.1 enable Enables the protocol. secure protocols tls1.2 disable Disables the protocol. secure protocols tls1.2 enable Enables the protocol. secure protocols tls1.3 disable Disables the protocol. secure protocols tls1.3 enable show Enables the protocol. Shows the current configuration. show history Displays the last 20 commands entered during the current CLI session. show statistics show connection statistics ssh username Sets the SSH user name for use when establishing tunneling connections with other devices. = SSH user name. tcp keep alive Sets the TCP keep alive idle time. This is the initial keep alive timeout. = timer value, in milliseconds. tcp keep alive interval Enables TCP keep alive for connect mode tunneling and sets the timer. = TCP keep alive for connect mode in milliseconds. tcp keep alive probes Sets the number of TCP keep alive probes. = number of TCP keep alive probes. tcp user timeout validate certificate disable Sets the timeout for TCP retransmissions. = timeout value, in milliseconds. Skips verification of the server certificate when connecting. validate certificate enable Requires verification of the server certificate when connecting. write Stores the current configuration in permanent memory. host (config-host:) level commands ( is between 1 and 32) clrscrn Clears the screen. default protocol Restores the default value of the protocol (Telnet). default remote port Sets the remote port (used to connect to the host) to the default value, which depends on the selected protocol. exit Exits to the configuration level. host Change to config host level name Sets the name of the host. = name of the host. no name Clears the name of the host. no remote address Clears the remote address of the host. no ssh username Clears the SSH username associated with the host. EDS3000 Command Reference 64