Lantronix EDS3000PS Command Reference - Page 80

6: Commands and Levels no send break Removes the configured send break character. preview connect menu Shows the layout of the connect menu with current settings. send break Sets the optional send break character. = the character. The character may be input as text, control, decimal, or hex. A control character has the form C. A decimal value character has the form \99. A hex value character has the form 0xFF. show Displays the current configuration. show history Displays the last 20 commands entered during the current CLI session. terminal Enters the configure-terminal level. = number of the terminal line (serial port) to be configured. terminal network Enters the configure-terminal level for the network. terminal type Sets the terminal type. tunnel write Enters the tunnel level. = number of the tunnel line (serial port) to be configured. Stores the current configuration in permanent memory. traps (config-snmp-traps) level commands authentication password Sets password used for authentication for traps. authentication protocol md5 Uses MD5 for authentication for traps. authentication protocol sha Uses SHA for authentication for traps. clrscrn Clears the screen. community Sets the SNMP trap community string. = name of the trap community string to be set. default authentication protocol default community Restores to default SNMPv3 authentication method: MD5 for traps. Restores the SNMP trap community to default: public default primary destination Restores the primary SNMP trap host port to default: 162. port default privacy protocol Restores to default SNMPv3 privacy encryption method: DES for traps. default secondary destination port Restores the secondary SNMP trap host port to default: 162. default security Restores to default SNMPv3 security method: Authentication, No Privacy for traps. default version Restores to default SNMP version v2c for traps. exit Exits to the next higher level. no authentication password Clears authentication password for traps. no primary destination Deletes the primary SNMP trap host. no privacy password Clears privacy password for traps. no secondary destination Deletes the secondary SNMP trap host. no username Clears SNMPv3 username for traps. primary destination Sets the primary SNMP trap host. = IP address or hostname of SNMP trap receiver. primary destination port Sets the primary SNMP trap host port. privacy password Sets password used for privacy encryption for traps. privacy protocol aes Uses AES for privacy encryption for traps. privacy protocol des Uses DES for privacy encryption for traps. EDS3000 Command Reference 80