Lantronix EDS3000PS Command Reference - Page 73
Display the RSS Feed status
View all Lantronix EDS3000PS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 73 highlights
6: Commands and Levels unit months Sets the reboot schedule interval to months. unit weeks write Sets the reboot schedule interval to weeks. Stores the current configuration in permanent memory. root level commands enable Enters the enable level. exit Exit from the system iperf Run iperf with command line parameters passed in quoted string. ping Ping destination continuously with 5 second timeout ping Ping destination n times with 5 second timeout ping Ping destination n times with x timeout (in seconds) show Show system information show history Displays the last 20 commands entered during the current CLI session. show lines Show line information show multicast routes show state of VIFs and multicast routing tables show routes show system routing table show rules show system rules tcpdump dump traffic on a network trace route Trace route to destination trace route Trace route to destination using TCP, ICMP, or UDP rss (config-rss) level commands clear rss Clear the RSS Feed data clrscrn Clears the screen. default max entries Restores the default number of RSS feed entries. exit Exits to the configuration level. feed disable Disables RSS feed. feed enable Enables RSS feed. max entries Sets the maximum number of RSS feed entries. persist disable Disables RSS feed data persistence. persist enable Enables RSS feed data persistence. show Displays the current configuration. show history Displays the last 20 commands entered during the current CLI session. show status write Display the RSS Feed status Stores the current configuration in permanent memory. serial (tunnel-serial:) level commands ( is the number of the line) clrscrn Clears the screen. default dtr Restores default DTR control, asserted while connected. dtr asserted while connected Asserts DTR whenever a connect or accept mode tunnel connection is active. dtr continuously asserted Asserts DTR regardless of any connections. dtr truport Asserts DTR to match remote DSR when connected via Telnet. dtr unasserted Does not assert DTR. exit Returns to the tunnel level. show Displays the current configuration. EDS3000 Command Reference 73