Lantronix EDS3000PS Command Reference - Page 56

6: Commands and Levels local port Sets a specific port for use as the local port. = the number of the port to use. no email connect Discontinues sending email alerts upon establishing a connect mode tunnel. no email disconnect Discontinues sending email alerts upon closing a connect mode tunnel. promote host Promotes the identified host, exchanging it place with the host above it, to adjust the order of the defined hosts. reconnect time show Sets the reconnect time value for tunneling connections established by the device in milliseconds. = timeout in milliseconds. Displays the current configuration. show history Displays the last 20 commands entered during the current CLI session. show status Displays tunnel connect status. start character write Sets the connect mode start character. The character may be input as text, control, decimal, or hex. A control character has the form C. A decimal value character has the form \99. A hex value character has the form 0xFF. Stores the current configuration in permanent memory. connection (config-consoleflow-connection:) level commands ( is 1 or 2) clrscrn Clears the screen. default host Restores the Hostname or IP address of consoleflow. default local port Clears the local port for consoleflow client. default mqtt host Restores the Hostname or IP address of MQTT server. default mqtt local port Clears the local port for consoleflow MQTT client. default mqtt port Restores the Port of MQTT server. default port Restores the Port of consoleflow. default proxy port Restores the Port of proxy server. default proxy type Restores the default Proxy server type (SOCKS5). exit Exits to the next higher level. host Sets the Hostname or IP address of consoleflow. local port Sets the local port for consoleflow client. When configured, a total of 16 consecutive ports will be reserved. mqtt host Sets the Hostname or IP address of MQTT server. mqtt local port mqtt port Sets the local port for consoleflow MQTT client. When configured, a total of 32 consecutive ports will be reserved. Sets the Port of MQTT server. mqtt security disable Disables SSL for MQTT. mqtt security enable Enables SSL for MQTT. mqtt state disable Disables MQTT. mqtt state enable Enables MQTT. no proxy host Restores the Hostname or IP address of the proxy server. no proxy password Restores the password for proxy server. no proxy username Clears the user name for the proxy server. port Sets the Port of consoleflow. proxy host Sets the Hostname or IP address of the proxy server. proxy password Sets the password the proxy server. proxy port Sets the Port of the proxy server. EDS3000 Command Reference 56