Lantronix EDS3000PS Command Reference - Page 71
Commands and Levels, EDS3000 Command Reference, <text>
![]() |
View all Lantronix EDS3000PS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 71 highlights
6: Commands and Levels echo commands disable Does not echo modem commands. echo commands enable Echoes modem commands. echo pluses disable Does not echo the +++ characters when entering modem command mode. echo pluses enable Echoes the +++ characters when entering modem command mode. error unknown commands Returns OK on unknown AT commands. disable error unknown commands Returns an error upon unknown AT commands. enable exit Returns to the tunnel level. incoming connection automatic Automatically answer incoming network connections. incoming connection disabled Disable incoming network connections. incoming connection manual Wait for an ATA command before answering an incoming network connection. no connect string Removes optional CONNECT string information for modem emulation. reassert Asserts tunnel modem status with current configured values. response type numeric Uses numeric type responses. response type text Uses text type responses. show Displays the current configuration. show history Displays the last 20 commands entered during the current CLI session. show status Displays tunnel modem status. verbose response disable Does not send Modem Response Codes. verbose response enable Sends Modem Response Codes out on the Serial Line. write Stores the current configuration in permanent memory. ntp (config-clock-ntp) level commands clrscrn Clears the screen. default server Restores the default NTP server address. exit Exits to the next higher level. server Sets the NTP server address. show Shows the current configuration. show history write Displays the last 20 commands entered during the current CLI session. Stores the current configuration in permanent memory. packing (tunnel-packing:) level commands ( is the number of the line) clrscrn Clears the screen. default packing mode Sets to default packing mode, which is 'Disable' default send character Removes the send character for packing mode. default threshold Restores the default threshold. default timeout Restores the default packing mode timeout. exit Returns to the tunnel level. no trailing character Removes the trailing character for packing mode. packing mode disable Disables packing. Data is sent to the network when received. packing mode send character Sets packing mode to accumulate data and transmit it upon receiving the configured send character on the line (serial port). packing mode timeout Sets packing mode to accumulate data and transmit it after a specified amount of time (timeout). EDS3000 Command Reference 71
![](/manual_guide/products/lantronix-eds3000ps-command-reference-d7ad853/71.png)