Lantronix EDS3000PS Command Reference - Page 67
Restores the default Maximum Transmission Unit MTU size.
![]() |
View all Lantronix EDS3000PS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 67 highlights
6: Commands and Levels state enable write Allows ICMP packets to be sent and received. Stores the current configuration in permanent memory. if 1 (config-if:eth0) level commands clrscrn Clears the screen. default gateway Sets the configurable gateway IP address to the default value. default mtu Restores the default Maximum Transmission Unit (MTU) size. dhcp client id Sets the DHCP client ID. dhcp disable Disables DHCP. dhcp enable Enables DHCP. dhcp renew Force DHCP to renew domain Sets the domain name. = name of the domain. exit Exits to the config level. hostname Sets the host name. = name of the host. ip address Sets the IP address and network mask. Formats accepted: 192.168.1.1 (default mask) 192.168.1.1/24 (CIDR) "192.168.1.1 255.255.255.0" (explicit mask) link Enter link configuration level mtu Sets the Maximum Transmission Unit (MTU) size. no default gateway Clears the default gateway. no dhcp client id Clears the DHCP client ID. no domain Clears the domain name. no hostname Clears the host name. no ip address Clears the IP address. no primary dns Clears the name of the primary DNS server. no secondary dns Clears the name of the secondary DNS server. primary dns Sets the IP address of the primary DNS server. secondary dns Sets the IP address of the secondary DNS server. show Displays the current configuration. show history Displays the last 20 commands entered during the current CLI session. show status write Show interface status Stores the current configuration in permanent memory. ip (config-ip) level commands clrscrn Clears the screen. default ip time to live Restores the default IP time to live. default multicast time to live Restores the default IP multicast time to live, which is one hop. exit Exits to the configuration level. ip time to live Sets the IP time to live, known by SNMP as 'ipDefaultTTL'. = number of hops that a typical IP packet is allowed to live. multicast time to live Sets the IP multicast time to live. = number of hops that a multicast IP packet is allowed to live. show Displays the current configuration. show history Displays the last 20 commands entered during the current CLI session. write Stores the current configuration in permanent memory. EDS3000 Command Reference 67
![](/manual_guide/products/lantronix-eds3000ps-command-reference-d7ad853/67.png)