Lantronix EDS3000PS Command Reference - Page 55

6: Commands and Levels smtp Changes to the command level for SMTP configuration and status. snmp Enters the snmp level. syslog Enters the syslog level. terminal Enters the configure-terminal level. = number of the terminal line (serial port) to be configured. terminal network Enters the configure-terminal level for the network. user management write Enters the config-user-management level. Stores the current configuration in permanent memory. connect (tunnel-connect:) level commands ( is the number of the line) block network disable Forwards (tunnels) network data in connect mode tunneling. block network enable Discards all data coming in from the connect mode tunnel before forwarding it to the serial interface (generally used for debugging). block serial disable Forwards (tunnels) serial data in connect mode tunneling. block serial enable Discards all data coming in from the serial interface before forwarding it to the connect mode tunnel (generally used for debugging). clrscrn Clears the screen. connect mode always Enables the tunneling server to always establish tunneling connections. connect mode any character Enables the tunneling server to establish a tunneling connection when a character is received on the corresponding line (serial port). connect mode disable Disables connect mode tunneling. connect mode modem control asserted Enables the tunneling server to make tunneling connections when the modem control pin is asserted. connect mode modem emulation Enables modem emulation for connect mode tunneling. connect mode start character Enables connect mode tunneling when the configured start character is received on the line. default connect mode Restores the default connect mode as 'disable'. default host mode Connects to the first host in the list that accepts the connection. default local port Uses a random port number as the local port for establishing tunneling connections to other devices. default reconnect time Restores the default reconnect time value for connect mode tunneling. default start character Defaults the connect mode start character. email connect Sets an email profile to use to send an email alert upon establishing a connect mode tunnel. = the number of the email profile to use. email disconnect Sets an email profile to use to send an email alert upon closing a connect mode tunnel. = the number of the email profile to use. exit Returns to the tunnel level. flush serial disable Characters already in the serial data buffer are retained upon establishing a connect mode tunneling connection. flush serial enable Flushes the serial data buffer upon establishing a connect mode tunneling connection. flush start character disable Enables forwarding of the connect start character into the network. flush start character enable Disables forwarding of the connect start character into the network. host Enters the next lower level. Specify the instance for the next lower level. host mode sequential Connects to the first host in the list that accepts the connection. host mode simultaneous Selects simultaneous connections to all hosts on the host list. kill connection Disconnects the active connect mode tunneling connection or connections. EDS3000 Command Reference 55