Lenovo PC 300 IBM PC300 (Type 2169) - Hardware Maintenance Manual (September 2 - Page 50
First/Second/Third Boot Device, Boot Up NumLock Status
View all Lenovo PC 300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 50 highlights
First/Second/Third Boot Device Default: Floppy/CDROM/HDD-0 Use these three items to select the priority and order of the devices that your system will search for an operating system at start-up time. Boot Other Device Default: Enabled If you enable this item, the system will search all other possible locations for an operating system if it fails to find one in the devices specified under the first, second and third boot devices. Swap Floppy Drive Default: Disabled If you have two floppy diskette drives in your system, this item allows you to swap around the assigned drive letters so that drive A becomes drive B, and drive B becomes drive A. Boot Up Floppy Seek Default: Enabled If this item is enabled, it checks the geometry of the floppy disk drives at start-up time. You don't need to enable this item unless you have a old diskette drive with 360K capacity. Boot Up NumLock Status Default: On This item defines if the keyboard Num Lock key is active when your system is started. Gate A20 Option Default: Fast This item defines how the system handles legacy software that was written for an earlier generation of processors. Leave this item at the default value. Firmware Write Protect Default: Disabled If you enable this item, it protects the firmware (BIOS) from being overwritten. Disable this item if you plan to flash a new BIOS to the system. Typematic Rate Setting Default: Disabled Determines if the typematic rate is to be used. When disabled, continually holding down a key on your keyboard generates only one instance. In other words, the BIOS will only report that the key is down. When the typematic rate is enabled, the BIOS will report as before, but will wait a moment. If the key is still down, it will report that the key has been depressed repeatedly. You might use this feature to accelerate cursor movements with the arrow keys. Typematic Delay (Msec) Default: 250 When the typematic rate is enabled, you can select the delay between when the key was first depressed and when the 48