Lenovo PC 300 IBM PC300 (Type 2169) - Hardware Maintenance Manual (September 2 - Page 73
Go to Index of Symptoms, Messages, Error Codes, or, Recovery Program
View all Lenovo PC 300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 73 highlights
q Make sure that the monitor refresh rate is correct. q Note any symptoms, messages, error codes, or beeps. q Make sure that there are no diskettes or CDs in the drives. 002 - DOES AN IBM LOGO SCREEN APPEAR? (YES, READ AHEAD. NO, GO TO STEP 004.) q Insert the diagnostics diskette in the diskette drive. q Alternatively, if your machine has diagnostics programs on a recovery partition on the HDD do the following: q Select F11 when prompted to start the Product Recovery Program q Select System Utilities from the menu q Select Run Diagnostics from the menu. 003 - DOES SYSTEM LOAD THE DIAGNOSTICS PROGRAM FROM THE DISKETTE DRIVE? (YES, READ AHEAD. NO, GO TO STEP 004.) q Follow the instructions on the screen and select Utility from the diagnostics program menu. q Select Tech Support Form from the menu, press F5 to execute, then generate a system configuration report. q Compare the system configuration list with the actual devices installed in system. NOTE: If necessary, remove the machine cover and visually compare the devices installed in system to those shown in the system configuration report. q Go to step 006. 004 - DO ANY MESSAGES, ERROR CODES, OR SYMPTOMS APPEAR? (YES, READ AHEAD. NO, GO TO STEP 005) q Go to "Index of Symptoms, Messages, Error Codes, or Beeps" on page 74. q End. 71