Lenovo PC 300 IBM PC300 (Type 2169) - Hardware Maintenance Manual (September 2 - Page 82
Index of Symptoms, Messages, Error
View all Lenovo PC 300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 82 highlights
Table 2-3 Error Symptoms List Error Symptoms Action/FRU NOTE: To diagnose a problem, first find the error symptom in the left column. If directed to a check procedure, replace the FRU indicated in the check procedure. If no check procedure is indicated, the first Action/FRU listed in right column is the most likely cause. System works but fails Load default settings. to enter power In Win98, check settings in Control saving mode when the Power Panel Power utility. Management is to Reload software from Recovery Enabled, and power partition. saving timer set in BIOS has elapsed. System hangs before system boot. "Index of Symptoms, Messages, Error Codes, or Beeps" on page 74. "Undetermined Problems" on page 104. System hangs after system boot. Execute a system test ("Diagnostics/All Tests" in PC-Doctor diagnostics program) and set it to stop at "Halt on Error" to see the potential cause of the problem. "Undetermined Problems" on page 104. Blinking cursor only; system does not work. "Start" on page 68. Diskette/IDE drive connection/cables Diskette/IDE disk drives "Undetermined Problems" on page 104. System board Diskette Drive NOTE: Ensure that the diskette drive is configured correctly in BIOS Setup and its read/write head is clean before diagnosing any diskette drive problems. 80