Lenovo ThinkCentre A30 Hardware Maintenance Manual (HMM) for ThinkCentre 2296, - Page 58

disconnect.

Get Lenovo ThinkCentre A30 PDF manuals and user guides View all Lenovo ThinkCentre A30 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 58 highlights

The following table describes the drive height limitation for each drive bay. Bay 1 and Bay 2 - Maximum height: 43.0 mm (1.7 in.) Bay 3 , Bay 4 , and Bay 5 - Maximum height: 25.8 mm (1.0 in.) Removing the drive 1. Remove the cover. See "Removing the cover" on page 32. 2. If you are removing a drive from bay 1 or bay 2, skip the next step. 3. Remove the front bezel by pushing in on the blue plastic tab at the rear of the chassis. 4. Disconnect the signal and power cables from the drive being removed. Note: Take note of the location of any cables you disconnect. You might have to disconnect cables to other drives to gain access to the drive you are removing. 52 Hardware Maintenance Manual

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
The
following
table
describes
the
drive
height
limitation
for
each
drive
bay.
Bay
±1²
and
Bay
±2²
-
Maximum
height:
43.0
mm
(1.7
in.)
Bay
±3²
,
Bay
±4²
,
and
Bay
±5²
-
Maximum
height:
25.8
mm
(1.0
in.)
Removing
the
drive
1.
Remove
the
cover.
See
“Removing
the
cover”
on
page
32.
2.
If
you
are
removing
a
drive
from
bay
1
or
bay
2,
skip
the
next
step.
3.
Remove
the
front
bezel
by
pushing
in
on
the
blue
plastic
tab
at
the
rear
of
the
chassis.
4.
Disconnect
the
signal
and
power
cables
from
the
drive
being
removed.
Note:
Take
note
of
the
location
of
any
cables
you
disconnect.
You
might
have
to
disconnect
cables
to
other
drives
to
gain
access
to
the
drive
you
are
removing.
52
Hardware
Maintenance
Manual