Lenovo ThinkCentre A30 Hardware Maintenance Manual (HMM) for ThinkCentre 2296, - Page 76
Diagnostic, error, codes
View all Lenovo ThinkCentre A30 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 76 highlights
Check/Verify Check the power-on switch for continuity. FRU/Action Power-on Switch Diagnostic error codes Refer to the following diagnostic error codes when using the diagnostic tests. See Chapter 4, "IBM Enhanced Diagnostics," on page 15 for information about the Diagnostic programs. In the following index, X can represent any number. Diagnostic Error Code 000-000-XXX BIOS Test Passed 000-002-XXX BIOS Timeout 000-024-XXX BIOS Addressing test failure 000-025-XXX BIOS Checksum Value error 000-026-XXX FLASH data error 000-027-XXX BIOS Configuration/Setup error 000-034-XXX BIOS Buffer Allocation failure 000-035-XXX BIOS Reset Condition detected 000-036-XXX BIOS Register error 000-038-XXX BIOS Extension failure 000-039-XXX BIOS DMI data error 000-195-XXX BIOS Test aborted by user FRU/Action 1. No action 1. Flash the system 2. System board 1. Flash the system 2. System board 1. Flash the system 2. Boot block 3. System board 1. Flash the system 2. Boot block 3. System board 1. Run Setup 2. Flash the system 3. Boot block 4. System board 1. Reboot the system 2. Flash the system 3. Run memory test 4. System board 1. Flash the system 2. System board 1. Flash the system 2. Boot block 3. System board 1. Flash the system 2. Adapter card 3. System board 1. Flash the system 2. System board 1. Information 2. Re-start the test, if necessary 70 Hardware Maintenance Manual