Lenovo ThinkCentre A70z Hardware Maintenance Manual for ThinkCentre A70z - Page 99
Installing a rear I/O assembly, snap into position.
View all Lenovo ThinkCentre A70z manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 99 highlights
9. Remove the rear I/O assembly and rear I/O assembly cables from the computer. Installing a rear I/O assembly To install a rear I/O assembly, do the following: 1. Reconnect all the rear I/O assembly cables. See "System board connectors" on page 68. 2. Position the new rear I/O assembly into the slots, and route the rear I/O assembly cables so that the excess cables tuck in the rear I/O assembly, and then push the rear I/O assembly 1 downward until the rear I/O assembly-locking tabs 2 snap into position. 3. Install the two screws 1 that secure the rear I/O assembly to the main bracket. Chapter 8. Replacing FRUs 93
9. Remove the rear I/O assembly and rear I/O assembly cables from the computer.
Installing a rear I/O assembly
To install a rear I/O assembly, do the following:
1. Reconnect all the rear I/O assembly cables. See “System board connectors” on page 68.
2. Position the new rear I/O assembly into the slots, and route the rear I/O assembly cables so that the
excess cables tuck in the rear I/O assembly, and then push the rear I/O assembly
1
downward until the
rear I/O assembly-locking tabs
2
snap into position.
3. Install the two screws
1
that secure the rear I/O assembly to the main bracket.
Chapter 8
.
Replacing FRUs
93