Lenovo ThinkPad 770E-ED TP 770X User's Reference that shipped with the system - Page 170
Problem, Cause and Action, MIDI/Joystick Port, Enable
View all Lenovo ThinkPad 770E-ED manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 170 highlights
Troubleshooting Charts Problem The MIDI connector on the port replicator does not work. The computer hangs when you power on or resume operation. The PC Card installed in a port replicator is not recognized and the PC Card slots are unusable. Cause and Action To enable the MIDI connector of the port replicator, use the ThinkPad Configuration program. Make sure that the MIDI connector is enabled by doing the following: 1. Start the ThinkPad Configuration program. 2. Click on MIDI/Joystick Port. 3. Confirm that the MIDI connector is enabled. If not, click on Enable; then click on OK. 4. Close the ThinkPad Configuration program and restart the computer. Note: When you restart the computer, you might need to install the MIDI driver. Follow the instructions on the screen and install the device driver for your computer's operating system. Make sure that: The AC Adapter is connected to the port replicator or docking station by following the instructions described in this book. The power-on indicator of the port replicator or docking station is on. The computer is securely attached to the port replicator, or the computer and the port replicator are securely attached to the docking station. If there is still a problem, refer to the manuals shipped with the port replicator and docking station. Make sure that: The AC Adapter is connected to the port replicator. The power-on indicator of the port replicator is on. The computer is securely attached to the port replicator. This problem might happen when you reinstall Windows 98, or when you initialize the system with Easy-Setup. 156 IBM ThinkPad 770X User's Reference