Lenovo ThinkServer RD330 Hardware Maintenance Manual - ThinkServer RD330 - Page 170
Installation Instructions, If the server is installed in a rack cabinet
View all Lenovo ThinkServer RD330 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 170 highlights
4. Ensure that the cover latch is in the open position. Place the server cover above the chassis so that the cover latch is aligned with the cover latch slot in the chassis. Then, lower the server cover onto the chassis until the cover latch is inserted into its slot and both sides of the server cover engage the guides on both sides of the chassis. PSU Mem CPU ID Figure 109. Installing the server cover 5. Pivot the cover latch to the closed position and slide the server cover to the front of the chassis at the same time until the server cover snaps into position and the cover latch is completely closed. PSU Mem CPU ID Figure 110. Closing the server cover completely 6. If the server is installed in a rack cabinet, reinstall the server into the rack cabinet. See the Rack Installation Instructions that comes with the server. 156 ThinkServer RD330 Hardware Maintenance Manual