Lenovo ThinkServer RD330 Hardware Maintenance Manual - ThinkServer RD330 - Page 35
Low-profile PCI Express card slot, PCI Express card slot, Ethernet connectors RJ-45, Notes
View all Lenovo ThinkServer RD330 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
On each hot-swap redundant power supply, there is a status LED near the power cord connector. When the LED is lit in green, it indicates that the hot-swap redundant power supply is working correctly. When the LED is lit in amber, it indicates that the hot-swap redundant power supply is likely to fail or has failed. 3 Low-profile PCI Express card slot It is recommended to attach a RAID card to the low-profile PCI Express card slot. Physical link width x8 Negotiable link width x4, x2, x1 Supported card length and height Low-profile card 4 PCI Express card slot Used to attach an Ethernet card or any other supported PCI Express card. Physical link width x16 Negotiable link width x16, x8, x4, x2, x1 Supported card length and height Half-length, full-height card 5 8 9 Ethernet connectors (RJ-45) Used to attach an Ethernet cable for a LAN. Each Ethernet connector has two status LEDs to help you identify the Ethernet connectivity, activity, and connection speed. Notes: • The Ethernet connector 0 (callout 9 ) marked with "MGMT" is for system management. If you want to use remote management functions, you need to connect an Ethernet cable to the Ethernet connector 0. • The Ethernet connector 0 for system management is 82574L by default. If you have selected share mode for the 82574L Ethernet connector in the Setup Utility program, you can use it as an ordinary Ethernet connector with 100 Mbps network connectivity. However, teaming with other Ethernet connectors is not supported if the management Ethernet connector is used as an ordinary Ethernet connector. For detailed information about setting the mode of the Ethernet connector for system management, see "Setting the mode of the Ethernet connector 0" on page 51. Figure 11. Ethernet status LEDs Ethernet status LED 1 Left 2 Right Color Amber Green None Green None Green Status On On Off On Off Blinking Description The connection speed is 1000 Mbps. The connection speed is 100 Mbps. The connection speed is 10 Mbps. The server is connected to a LAN. The server is disconnected from a LAN. The LAN is connected and active. Chapter 3. Product overview 21