LevelOne GTL-5280 Manual - Page 105

3-7 MVR The MVR feature enables multicast traffic forwarding on the Multicast VLAN. In a multicast television application, a PC or a television with a set-top box can receive the multicast stream. Multiple set-top boxes or PCs can be connected to one subscriber port, which is a switch port configured as an MVR receiver port. When a subscriber selects a channel, the set-top box or PC sends an IGMP join message to Switch A to join the appropriate multicast. Uplink ports that send and receive multicast data to and from the multicast VLAN are called MVR source ports. 3-7.1 Configuration The section describes user could set the MVR basic Configuration and some parameters in the switch Web Interface To configure the MVR Configuration in the web interface: 1. Click Configuration, MVR, Configuration 2. Scroll the MVR mode to enable or disable and Scroll to set all parameters. 3. Click the Apply to Apply the setting 4. If you want to cancel the setting then you need to click the Reset button. It will revert to previously Saved values Figure 3-7.1: The MVR Configuration 97