LevelOne GTL-5280 Manual - Page 54

3-2.2 Rate Limiters The section describes how to configure the switch's ACL Rate Limiter parameters. The Rate Limiter Level from 1 to 16 that allow user to set rate limiter value and units with pps or kbps. Web Interface To configure ACL Rate Limiter in the web interface: 1. Click Configuration, ACL, then Rate Limiter 2. To specific the Rate field and the range from 0 to 3276700. 3. To scroll the Unit with pps or kbps 4 . Click the Apply to Apply the setting 5. If you want to cancel the setting then you need to click the reset button. It will revert to previously Saved values. Figure 3-2.2: The ACL Rate Limiter Configuration Parameter description:  Rate Limiter ID : The rate limiter ID for the settings contained in the same row.  Rate The allowed values are: 0-3276700 in pps or 0, 100, 200, 300, ..., 1000000 in kbps.  Unit : Specify the rate unit. The allowed values are: pps: packets per second. kbps: Kbits per second.  Buttons Apply - Click to Apply changes. Reset- Click to undo any changes made locally and revert to previously Saved values. 46