LevelOne GTL-5280 Manual - Page 99

3-6.3 Port Group Filtering The section describes that you could to set the Port Group Filtering in the MLD Snooping function. On the UI that you could add new filtering group and safety policy. Web Interface To configure the MLD Snooping Port Group Configuration in the web interface: 1. Click Configuration, MLD Snooping, Port Group Filtering Configuration 2. Click the Add new Filtering Group 3. Specify the Filtering Groups with entries per page. 4. Click the Apply to Apply the setting 5. If you want to cancel the setting then you need to click the Reset button. It will revert to previously Saved values Figure 3-7.3: The MLD Snooping Port Group Filtering Configuration Parameter description:  Delete : Check to delete the entry. It will be deleted during the next Apply.  Port : The logical port for the settings. You can evoke to enable the port to join filtering Group  Filtering Groups The IP Multicast Group that will be filtered.  Buttons: Apply - Click to Apply changes. Reset- Click to undo any changes made locally and revert to previously Saved values. 91