LevelOne GTL-5280 Manual - Page 41
Tarp
View all LevelOne GTL-5280 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
2-6.7 Tarp The function is used to configure SNMP trap. To create a new trap account, please check button, and enter the trap information then check . Max Group Number : 6. Web Interface To configure SNMP Trap setting: 1. Click SNMP, Trap . 2. Display the SNMP Trap Hosts information table. 3. Choice a entry to display and modify the detail parameters or click delete button to delete the trap hosts entry. Figure 2-6.7: The SNMP Trap Host Configuration Parameters description: Delete: Check entry then check button, the entry will be delete. Trap Version: You may choose v1, v2c or v3 trap. Server IP: To assign the SNMP Host IP address. UDP Port: To assign Port number. Default: 162 33
33
2-6.7 Tarp
The function is used to configure SNMP trap. To create a new trap account, please check <No
number> button, and enter the trap information then check <Apply>. Max Group Number : 6.
Web Interface
To configure SNMP Trap setting:
1.
Click SNMP, Trap .
2.
Display the SNMP Trap Hosts information table.
3.
Choice a entry to display and modify the detail parameters or click
delete button to delete the trap hosts entry.
Figure 2-6.7:
The SNMP Trap Host Configuration
Parameters description:
Delete:
Check <Delete> entry then check <Apply> button, the entry will be delete.
Trap Version:
You may choose v1, v2c or v3 trap.
Server IP:
To assign the SNMP Host IP address.
UDP Port:
To assign Port number. Default: 162