LevelOne GTL-5280 Manual - Page 171
DSCP Classification
View all LevelOne GTL-5280 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 171 highlights
3-14.9 DSCP Classification The section describes to teach user to configure and allows you to map DSCP value to a QoS Class and DPL value. Others the settings relate to the currently selected unit, as reflected by the page header. Web Interface To configure the DSCP Classification parameters in the web interface: 1.Click Configuration, QoS, DSCP Translation 2. Scroll to set the DSCP Parameters 3. Click the Apply to Apply the setting 4. If you want to cancel the setting then you need to click the Reset button. It will revert to previously Saved values Figure 3-14.9: The DSCP Classification Configuration Parameter description: QoS Class : Available QoS Class value ranges from 0 to 7. QoS Class (0-7) can be mapped to followed parameters. DPL : Drop Precedence Level (0-1) can be configured for all available QoS Classes. DSCP : Select DSCP value (0-63) from DSCP menu to map DSCP to corresponding QoS Class and DPL value Buttons: Apply - Click to Apply changes. Reset- Click to undo any changes made locally and revert to previously Saved values. 163