LevelOne GTL-5280 Manual - Page 175

3-14.11 QCL Status The section will let you know how to configure and shows the QCL status by different QCL users. Each row describes the QCE that is defined. It is a conflict if a specific QCE is not applied to the hardware due to hardware limitations. The maximum number of QCEs is 256 on each switch. Web Interface To display the QoS Control List Status in the web interface: 1. Click Configuration, QoS , QCL Status 2. If you want to auto-refresh the information then you need to evoke the "Auto-refresh". 3. Scroll to select the combined, static, Voice VLAN and conflict. 4. To Click the " Refresh" to refresh a entry of the MVR Statistics Information. Figure 3-14.11: The QoS Control List Status Parameter description:  User : Indicates the QCL user.  QCE# Indicates the index of QCE.  Frame Type : Indicates the type of frame to look for incomming frames. Possible frame types are: Any: The QCE will match all frame type. Ethernet: Only Ethernet frames (with Ether Type 0x600-0xFFFF) are allowed. LLC: Only (LLC) frames are allowed LLC: Only (SNAP) frames are allowed. IPv4: The QCE will match only IPV4 frames. IPv6: The QCE will match only IPV6 frames.  Port : Indicates the list of ports configured with the QCE.  Action : Indicates the classification action taken on ingress frame if parameters configured are matched with the frame's content. There are three action fields: Class, DPL and DSCP. Class: Classified QoS Class; if a frame matches the QCE it will be put in the queue. DPL: Drop Precedence Level; if a frame matches the QCE then DP level will set to value displayed under DPL column. DSCP: If a frame matches the QCE then DSCP will be classified with the value displayed 167