LevelOne GTL-5280 Manual - Page 191

3-21 Trap Event Severity The function, is used to set a Alarm trap and get the Event log. The Trap Events Configuration function is used to enable the switch to send out the trap information while pre-defined trap events occurred. Web Interface To configure the Trap Event Severity Configuration in the web interface: 1. Click Configuration, Trap Event Severity Configuration 2. Scroll to select the Group name and Severity Level 3. Click the Apply to Apply the setting 4. If you want to cancel the setting then you need to click the Reset button. It will revert to previously Saved values Figure 3-21.1: The Trap Event Severity Configuration Parameter description:  Group Name : The field describe the Trap Event defernition.  Severity Level : To scroll to select the event type with "Emerg, Alert, Crit, Error, Warming, Notice, Info and Debug", .  Buttons: Apply - Click to Apply changes. Reset- Click to undo any changes made locally and revert to previously Saved values. 183