LevelOne GTL-5280 Manual - Page 189
Mirroring
View all LevelOne GTL-5280 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 189 highlights
3-20 Mirroring You can mirror traffic from any source port to a target port for real-time analysis. You can then attach a logic analyzer or RMON probe to the target port and study the traffic crossing the source port in a completely unobtrusive manner. Mirror Configuration is to monitor the traffic of the network. For example, we assume that Port A and Port B are Monitoring Port and Monitored Port respectively, thus, the traffic received by Port B will be copied to Port A for monitoring. Web Interface To configure the Mirror in the web interface: 1. Click Configuration, Mirroring 2. Scroll to select Port to mirror on which port 3. Scroll to disabled, enable, TX Only and RX Only to set the Port mirror mode 4. Click the Apply to Apply the setting 5. If you want to cancel the setting then you need to click the Reset button. It will revert to previously Saved values . Figure 3-20.1: The Mirror Configuration 181