LevelOne GTL-5280 Manual - Page 74
MSTI Priorities
View all LevelOne GTL-5280 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 74 highlights
3-4.3 MSTI Priorities When you implement an Spanning Tree protocol on the switch that the bridge instance. The CIST is the default instance which is always active. For controls the bridge priority. Lower numeric values have better priority. The bridge priority plus the MSTI instance number, concatenated with the 6-byte MAC address of the switch forms a Bridege Identifier The section describes it allows the user to inspect the current STP MSTI bridge instance priority configurations, and possibly change them as well. Web Interface To configure the Spanning Tree MSTI Priorities parameters in the web interface: 1. Click Configuration, Spanning Tree, MSTI Priorities 2. Scroll the Priority maximum is 240. Default is 128. 3. Click the Apply to Apply the setting 4. If you want to cancel the setting then you need to click the Reset button. It will revert to previously Saved values Figure 3-4.3: The MSTI Configuration Parameter description: MSTI : The bridge instance. The CIST is the default instance, which is always active. Priority : Controls the bridge priority. Lower numeric values have better priority. The bridge priority plus the MSTI instance number, concatenated with the 6-byte MAC address of the switch forms a Bridge Identifier. Buttons Apply - Click to Apply changes. Reset- Click to undo any changes made locally and revert to previously Saved values. 66