LevelOne GTL-5280 Manual - Page 148
Timer Values, Application, Attribute Type, GARP Applicant, Buttons, Apply, Reset
View all LevelOne GTL-5280 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 148 highlights
Parameter description: Port : The Port coulmn shows the list of ports for which you can configure GARP settings. There are 2 types configuration settings which can be configured on per port bases. Timer Values Applicantion Attribute Type GARP Applicant Timer Values : To set the GARP join timer, leave timer and .leave all timers, units is Micro-second. Three different timers can be configured on this page: Join Timer :The default value for Join timer is 200ms. Leave Timer : The range of values for Leave Time is 600-1000ms. The default value for Leave Timer is 600ms. Leave All Timer : The default value for Leave All Timer is 10000ms Application : Currently only supported application is GVRP. Attribute Type : Currently only supported Attribute Type is VLAN. GARP Applicant This configuration is used to configure the Applicant state machine behaviour for GARP on a perticular port locally. normal-participant: In this mode the Applicant state machine will operate normally in GARP protocol exchanges. non-participant: In this mode the Applicant state machine will not participate in the protocol operation. The default configuration is normal participant. Buttons: Apply - Click to Apply changes. Reset- Click to undo any changes made locally and revert to previously Saved values. 140