LevelOne GTL-5280 Manual - Page 91
Group Infermation, Navigating the IGMP Group Table, IGMP Group Table Columns
View all LevelOne GTL-5280 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 91 highlights
3-5.5 Group Infermation After you complete to set the IGMP Snooping function then you could let the switch to display the IGMP Snooping Group Information. Entries in the IGMP Group Table are shown on this page. The IGMP Group Table is sorted first by VLAN ID, and then by group. The will use the last entry of the currently displayed table as a basis for the next lookup. When the end is reached the text "No more entries" is shown in the displayed table. Use the button to start over. Web Interface To display the IGMP Snooping Group Information in the web interface: 1. Click Configuration, IGMP Snooping, Group Information 2. If you want to auto-refresh the information then you need to evoke the "Auto-refresh". 3. Click " Refresh" to refresh a entry of the IGMP Snooping Groups Information. 4. Click "> " to move to previous or next entry. Figure 3-5.5: The IGMP Snooping Groups Information. Parameter description: Navigating the IGMP Group Table The "Start from VLAN", and "group" input fields allow the user to select the starting point in the IGMP Group Table. The will use the last entry of the currently displayed table as a basis for the next lookup. When the end is reached the text "No more entries" is shown in the displayed table. IGMP Group Table Columns VLAN ID : VLAN ID of the group. Groups : Group address of the group displayed. Port Members : Ports under this group. Auto-refresh To evoke the auto-refresh icon then the device will refresh the log automatically. Upper right icon (Refresh, ) You can click them for refresh the IGMP Group Status by manual, others for next/up page or entry.. 83