LevelOne GTL-5280 Manual - Page 53

Parameter description:  Port : The logical port for the settings contained in the same row.  Policy ID : Select the policy to apply to this port. The allowed values are 1 through 8. The default value is 1.  Action : Select whether forwarding is permitted ("Permit") or denied ("Deny"). The default value is "Permit".  Rate Limiter ID : Select which rate limiter to apply on this port. The allowed values are Disabled or the values 1 through 16. The default value is "Disabled".  Port Copy : Select which port frames are copied on. The allowed values are Disabled or a specific port number. The default value is "Disabled".  Mirror : Specify the mirror operation of this port. The allowed values are: Enabled: Frames received on the port are mirrored. Disabled: Frames received on the port are not mirrored. The default value is "Disabled".  Logging : Specify the logging operation of this port. The allowed values are: Enabled: Frames received on the port are stored in the System Log. Disabled: Frames received on the port are not logged. The default value is "Disabled". Please note that the System Log memory size and logging rate is limited.  Shutdown : Specify the port shut down operation of this port. The allowed values are: Enabled: If a frame is received on the port, the port will be disabled. Disabled: Port shut down is disabled. The default value is "Disabled".  Counter : Counts the number of frames that match this ACE.  Buttons Apply - Click to Apply changes. Reset- Click to undo any changes made locally and revert to previously Saved values.  Upper right icon (Refresh, clear) You can click them for refresh the ACL Port Configuration or clear them by manual. 45