LevelOne GTL-5280 Manual - Page 169
DSCP Translation
View all LevelOne GTL-5280 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 169 highlights
3-14.8 DSCP Translation The section describes the swtich allows you to configure the basic QoS DSCP Translation settings for all switches. DSCP translation can be done in Ingress or Egress. Web Interface To configure the DSCP Translation parameters in the web interface: 1. Click Configuration, QoS, DSCP Translation 2. Scroll to set the Ingress Translate and Egress Remap DP0 and Remap DP1 Parameters 3. Evoke to enable or disable Classify 4. Click the Apply to Apply the setting 5. If you want to cancel the setting then you need to click the Reset button. It will revert to previously Saved values Figure 3-14.8: The DSCP Translation Configuration 161
161
3-14.8 DSCP Translation
The section describes the swtich allows you to configure the basic QoS DSCP Translation
settings for all switches. DSCP translation can be done in Ingress or Egress.
Web Interface
To configure the DSCP Translation parameters in the web interface:
1. Click Configuration, QoS, DSCP Translation
2. Scroll to set the Ingress Translate and Egress Remap DP0 and Remap
DP1 Parameters
3. Evoke to enable or disable Classify
4. Click the Apply to Apply the setting
5. If you want to cancel the setting then you need to click the Reset button.
It will revert to previously Saved values
Figure 3-14.8:
The DSCP Translation Configuration