Lexmark Z32 Color Jetprinter User's Guide for Windows 95, Windows 98, and Maci - Page 12

Loading specialty paper Load up to: Make sure: 10 envelopes • The print side is facing you. • The stamp location is in the upper left corner. • The envelopes are loaded vertically against the right side of the sheet feeder. • The paper guide is against the side of the envelopes. 10 greeting cards, index cards, postcards, or photo cards • The print side is facing you. • The cards are loaded vertically against the right side of the sheet feeder. • The paper guide is against the side of the cards. 25 sheets of photo paper, glossy paper, or coated paper • The glossy or coated side is facing you. • The paper guide is against the side of the paper. 20 sheets of banner paper • The print side is facing you, and then place the banner paper behind the printer. Then bring the unattached edge of the first page over the top of the printer and into the sheet feeder. • The paper guide is against the side of the paper. Note: Select Banner (Letter) or Banner (A4) Paper Size in the Lexmark Z22/Z32 Page Setup dialog box. For help, see page 11. 10 transparencies • The rough side of the transparency is facing you (smooth side down). • The paper guide is against the edge of the transparencies. 100 sheets of custom size paper • The print side is facing you and the paper guide is against the side of the paper. • Your paper size fits within these dimensions: - Width: 76 mm to 215.9 mm 3.0 in.to 8.5 in. - Length 127 mm to 432 mm 5.0 in. to 17.0 in. 25 iron-on transfers • You follow the instructions on the packaging to load the iron-on transfers. • The paper guide is against the side of the iron-on transfers. • 8 • • • Chapter 2 •