Linksys NMH305 User Guide - Page 37

Chapter 5 Chapter 5: Use of the LCD Menu This chapter describes functions of the LCD menu, which is only featured on the Media Hub with LCD (NMH400 Series). Use the LCD menu to do the following: •• initiate backup jobs for computer(s) running the backup software (Refer to NTI Shadow, page 37 for more information.) •• back up or import files from your USB storage device or memory card to the Media Hub •• display status information for the Media Hub NOTE: For the IP address of the Media Hub, go to Status > Network. •• configure LCD screen settings •• power off the Media Hub Use of the LCD Menu •• While the Media Hub is booting up, press the OK button to boot backup firmware from the hard drive. •• To display the main menu, press the OK button. How to Access the LCD Menu After the Media Hub is powered on and boots up, the main menu is displayed and offers these options: Backup Select this option to initiate computer or device backup jobs. Status Select this option to view space, usage, or network information. Settings Select this option to configure the screensaver or backlight settings. You can also upgrade the firmware of the Media Hub. Power Off Select this option to power off the Media Hub. Main Menu If the screensaver with the Friendly Name is displayed, press the OK button to activate the LCD menu. Media Hub with LCD (NMH400 Series) How to Navigate the LCD Menu Use the navigation pad to navigate the LCD menus. Press the up or down arrow to move up or down the menu choices. Press the right arrow to move to a lower menu level. Press the left arrow to move to a higher menu level. The OK button has three functions: •• To select a menu choice, press the OK button. Media Hub Screensaver Backup The Backup screen allows you to copy files from your computers or devices to the Media Hub. Backup 33