Memorex MVD4540 Owners Manual - Page 12
Basic connections
UPC - 749720454006
View all Memorex MVD4540 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
Basic connections If you are using an antenna system, follow these instructions. If you are a cable (CATV) subscriber, skip ahead to page 14 for the proper connections. ANTENNA TO DVD/VCR CONNECTION The DVD/VCR must be connected "between" the antenna and the TV. First, disconnect the antenna from the TV and connect it to the DVD/VCR. Then connect the DVD/VCR to the TV. Below are 3 common methods of connecting an antenna system to a DVD/VCR. Find the type of antenna system you are using and follow the connection diagram. 1 Combination VHF/UHF Antenna with 75 ohm Coaxial Cable DVD/VCR 75 ohm Coaxial Cable IN (ANT) OUT (TV) 2 Combination VHF/UHF Antenna with 300 ohm Twin Lead (Flat) Wire DVD/VCR Matching Transformer 300 ohm Input IN (ANT) 75 ohm output (not supplied) OUT (TV) 300 ohm Twin Lead (Flat) Wire 3 Separate VHF and UHF Antennas Combiner 75/300 ohm Inputs VHF UHF 75 ohm output (not supplied) 300 ohm Twin Lead (Flat) Wire DVD/VCR IN (ANT) OUT (TV) 75 ohm Coaxial Cable NOTE: If both VHF and UHF antennas have 300 ohm twin lead (flat) wires, use a combiner having two 300 ohm inputs and one 75 ohm output. NOTES: • A clear picture will not be obtained by the DVD/VCR unless the antenna signal is good. Connect the antenna to the DVD/VCR properly. • For better quality recording, an indoor antenna or a telescopic antenna is not recommended. The use of an outdoor type antenna is required. 12 • If you are not sure about the connection, please refer to qualified service personnel. 2C51001AE (12-15) 12 18/11/03, 2:38 PM