Memorex MVD4540 Owners Manual - Page 32
Duplicating a video tape
UPC - 749720454006
View all Memorex MVD4540 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
Duplicating a video tape Duplicating a video tape If you connect the VCR to another VCR or camcorder, you can duplicate a previously recorded tape. Make all connections before turning on the power. 1 Load a blank cassette tape with the erase prevention tab intact into the recording VCR. Load a previously recorded tape into the playback VCR or CAMCORDER. 4 Press REC/OTR on the recording VCR, then press PAUSE/STILL. 2 Press SPEED to select the desired tape speed SP or SLP. It is recommended that you set the Speed to the SP mode on the recording VCR for best results. 5 Press the PLAY button on the playback VCR or CAMCORDER, then press the PAUSE/STILL button. 3 Press INPUT SELECT to select AUDIO/VIDEO input position. "L" will appear in the display. 6 Release the recording pause and the playback still simultaneously to begin the duplicating process. Connection with second Video recorder Playback VCR To VIDEO OUT To AUDIO (R) OUT To AUDIO (L) OUT AUDIO/VIDEO Cord (supplied) Recording VCR To VIDEO IN To AUDIO (R) IN To AUDIO (L) IN Connection with Video camera Playback Camcorder To AV Jack Recording VCR To VIDEO IN To AUDIO (R) IN To AUDIO (L) IN AUDIO/VIDEO Cord (not supplied) For duplicating a previously recorded tape from a camcorder, follow the camcorder manufacturer's instructions. A typical camcorder dubbing hookup is shown above. 32 2C51001AE (32-33) 32 18/11/03, 2:38 PM