Memorex MVD4540 Owners Manual - Page 31

ENGLISH Stereo recording and playback / Second Audio Program (SAP) Stereo recording and playback The VHS Hi-Fi audio system permits high fidelity recording of MTS STEREO TV broadcasts. POWER EJECT OPEN/ CLOSE VCR/DVD 1 2 3 DISPLAY/CALL INPUT SELECT/ 45 6 PROGRESSIVE 7890 TRACKING/ SET - CH SELECT/ ENTER TRACKING/ SET + CH SETUP/ DVD MENU VCR MENU CLEAR/ CANCEL RETURN MARKER ZOOM TOP MENU REPEAT A-B When a MTS STEREO broadcast is received, the word STEREO will appear on the screen and the program can be viewed or recorded in stereo. The Hi-Fi STEREO recording procedure is the same as for normal recordings. STEREO NOTE: When using a CATV system, stereo TV programs may be transmitted over a mono cable channel. In this case the word "STEREO" will not appear and the sound will be in mono. Output selection When viewing an MTS STEREO TV program, or playing a prerecorded VHS Hi-Fi STEREO videotape, press AUDIO SELECT to select how the audio will be heard through the speakers. Normally set to the Hi-Fi STEREO position, this button can be set to the MONO position if the stereo broadcast or videotape audio is of poor quality. The "R" and "L" positions allow the audio from the Right or Left Hi-Fi channel to be heard over both TV speakers. This button has no effect when viewing a MONO videotape or TV program. Each time when you press the button, OUTPUT SELECTION display appears on the screen for several seconds. Refer to the chart below. OUTPUT SOUND HEARD ON BOTH SELECTION SPEAKERS STEREO L ch R ch MONO STEREO LEFT CHANNEL AUDIO RIGHT CHANNEL AUDIO MONO AUDIO/ JUMP/ ANGLE/ CLOCK/ AUDIO SELECT ZERO RETURN COUNTER RESET COUNTER TIMER REC SUB TITLE/ ATR PLAY MODE/ SPEED TV/VCR REW/SEARCH PLAY SEARCH/F.FWD INDEX/SKIP REC/OTR STOP SKIP/INDEX SLOW PAUSE/STILL Second Audio Program (SAP) Your VCR is fitted with a SAP broadcast system which enables you to switch to a second audio program when viewing a selected channel. This function applies only when the program is broadcast in multi-languages through the SAP broadcast system. 1 Press VCR MENU. Then press SET + or - to select "SAP". 2 Then press ENTER to select "ON". Then press VCR MENU until the menu screen is cleared. MENU TIMER REC SET AUTO REPEAT ON OFF SAP ON OFF CH SETUP SYSTEM SETUP á+/-/ENTER/MENUñ NOTES: • When playing back a tape that is not recorded in Hi-Fi stereo mode, the audio will automatically be monaural. • When listening to a VHS Hi-Fi video tape or MTS broadcast through the VHF/UHF jack (Audio/Video cord not connected), the sound will be monaural. Listening to SAP When the VCR is turned on or a channel selection is made, make certain the letters "SAP" appear on the screen. This means that the "Second Audio Program" broadcasting is available. STEREO SAP SAP OR 31 2C51001AE (26-31) 31 18/11/03, 2:38 PM