Motorola 49901 Software Release Notes - Page 14

New Features Part No. T0001-42, Rev C October, 2002 Page 14 of 103 Vanguard 7300 Series Routers - Version 1 and Version 2 Release 6.1 Vanguard 7300 Chassis Redesign (Version 2) The Vanguard 7300 Series chassis has been redesigned. The redesigned chassis is referred to as The Vanguard 7300 Series Version 2. Software must be configured to match the chassis type and version. (DRFaa20456) 7300 Version 1 The table below summarizes common and distinct features of each Vanguard Enclosure Features Version 1 Series enclosure: Feature Number of Slots Height Rack-mountable Redundant AC and DC Power Vanguard 7310 Version 1 5 (horizontal) 3U Yes none Vanguard 7330 Version 1 8 (vertical) 8U Yes Yes, dual power supplies 7300 Version 2 The table below summarizes common and distinct features of each Vanguard Enclosure Features Version 2 Series enclosure: Feature Number of Slots Height Rack-mountable Redundant AC and DC Power Vanguard 7310 Version 2 5 (horizontal) 4U Yes Yes, dual power supplies Vanguard 7330 Version 2 8 (horizontal) 4U Yes Yes, dual power supplies Set the Chassis Version Settings When upgrading a 7300 Series Version 1 to release 6.1.R000 or greater, you must set the chassis version setting. If the setting is incorrect (for example, when a CPU card is swapped from one chassis to another of a different version) the interface cards will not be recognized by the node in the correct physical slot location. Incorrect settings can be fixed by setting the software Chassis Version through the ZAP diagnostics menu. Note Units shipping from the factory with Release 6.1.R000 or greater will have the version set to match the chassis. Release 6.1.R000 or greater software is recommended for Vanguard 7310 and 7330 Version 2.