Motorola 49901 Software Release Notes - Page 60
Voice Port Loopback Test Output Level - Vanguard 340 and 6400 Series, Vanguard 340
UPC - 786523499018
View all Motorola 49901 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 60 highlights
Known Software Limitations Part No. T0001-42, Rev C October, 2002 Page 60 of 103 Voice Port Loopback Test Output Level - Vanguard 340 and 6400 Series The local voice port loopback test does not display the correct output level. (DRCaa23032) Workaround: At present, there is no workaround. Vanguard 6455 Conversion Options in Vanguide Builder When creating an image for the Vanguard 6455 using the Vanguide builder, the LLC-TR and LLC-FR LLC-to-SDLC Conversion options do not appear under the BSC-to-SNA Conversion option. Only LLC-ETH appears and this is automatically selected. (DRFaa19586) Workaround: If the user wishes to create a Vanguard 6455 image that supports either BSC 3270 to SNA Conversion or BSC 2780 to SNA Conversion that runs over a LLC Token Ring session or LLC Frame Relay session, the user should: 1) Select BSC 3270-to-SNA Conversion or BSC 2780-to-SNA Conversion from the BSC-to-SNA Conversion Options 2) Then select LLC Token Ring Conversion and/or LLC Frame Relay Conversion from the IBM SNA Features list. Vanguard 340 Series Audio on the FXS port Passing 6.3k audio on three of the four ports on the quad FXS card causes MIPS errors. MIPS errors are causing static on the output audio. (DRCaa23051) Workaround: At present, there is no workaround. Vanguard 340 Quad FXS Board Failure A board failure occurs when you place a call between any voice port and a quad FXS voice port, and then enter the diagnostics menu and initiate a Voice Port Loopback test while the call is up. The quad FXS board fails with a background diagnostics failure. (DRCaa23031) Workaround: At present, there is no workaround. Vanguard 340, Vanguard 6400 Series - Rx Offhook/Onhook Filter Timer The Rx Offhook/Onhook Filter Timer is not working correctly on the Quad FXS card. (DRCaa23046) Workaround: At present, there is no workaround. Vanguard 320, SoTCP Calls not Connecting SoTCP calls (data or voice) are not connecting if the SoTCP "TCP Keep Alive Timer" is disabled. If enabled, a SoTCP boot does not initialize the timer. A warm boot is required. (DRFaa19651) Workaround: At present, there is no workaround. Vanguard 7300 NAT Node Reset If a large number of NAT entries are configured each having multiple interfaces, upon a Boot-Router-NAT-ALL the router could reset (with an FER) instead of just booting the NAT entries. (DRFaa20065) Workaround: In order to avoid having the router reset, only configure a single interface per NAT entry. If an entry requires to be applied to multiple interfaces, you may configure multiple entries, but depending on the number of entries the node may reset upon boot.