NEC DTL-6DE-1 User Manual - Page 140
To Enter With Account Code (see above), VOICE CALL, Using Soft Key
UPC - 722580004475
View all NEC DTL-6DE-1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 140 highlights
STEP 5: Dial desired number. STEP 6: If an "Authorization Code" is required, caller hears special dial tone. STEP 7: Enter "Authorization Code", or call will be de- nied. Note: This option is available only if system is programmed with Least Cost Routing. To Enter With Account Code (see above) Service set tone is optional depending upon system programming. Note: If a 4-, 8-, 16- or 32-button display terminal is used, the display indicates all of the digits dialed. VOICE CALL DT730/710 DT330/310 STEP 1: Lift handset. STEP 2: Dial desired station number. STEP 3: Press Voice. VOICE 2000 1:25 PM MON 12 JUL 2010 STEP 4: Speak to called party. Using Soft Key STEP 1: Lift handset. STEP 2: Dial desired station number; VOICE Soft Key appears while station is ringing. 2000 1:25 PM MON 12 JUL 2010 MIC VOICE >>> STEP 3: Press VOICE Soft Key. Speak to called party. Note: A Voice Call may be programmed on a OneTouch Speed Calling key by pressing OneTouch Speed Calling key, dialing the extension, and pressing the Transfer key. (V displays if programming on an DT Series with LCD. Save by pressing One-Touch Speed Calling key.) Note: If called party is on their line when a Voice Call is attempted, calling station's display indicates: VOICE BUSY 1:25 PM MON 12 JUL 2010 Note: A voice call is restricted if called party's station is not a DT Series. Display indicates: VOICE REST 1:25 PM MON 12 JUL 2010 132