Netgear DM111PSP-100NAS DM111PSPv2 User Manual - Page 60
To con remote management, Advanced > Remote Management, Turn Remote Management
View all Netgear DM111PSP-100NAS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 60 highlights
Broadband ADSL2+ Modem DM111PSPv2 To configure remote management: 1. Select Advanced > Remote Management to display this screen: 2. Select the Turn Remote Management On check box. 3. Specify the external addresses that can access remote management. For security, restrict access to as few external IP addresses as practical: • To allow access from a single IP address on the Internet, select Only This Computer, and enter the IP address that is allowed access. • To allow access from a range of IP addresses on the Internet, select IP Address, and enter a beginning and ending IP address to define the allowed range. • To allow access from any IP address on the Internet, select Everyone. 4. Specify the port number to be used for accessing the modem interface. Web browser access usually uses the standard HTTP service port 80. For greater security, you can change it so the remote modem interface uses a custom port by entering that number in the field provided. Choose a number between 1024 and 65535, but do not use the number of any common service port. The default is 8080, which is a common alternate for HTTP. 5. Click Apply to save your changes. To access your modem from the Internet, type your modem's WAN IP address in your browser's Address field, followed by a colon (:) and the custom port number. Advanced Settings 60