Netgear FVS114NA FVS114 Reference Manual - Page 118
Table 7-1., FVS114 Status fields, This screen shows the following parameters
View all Netgear FVS114NA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 118 highlights
Reference Manual for the ProSafe VPN Firewall FVS114 This screen shows the following parameters: Table 7-1. FVS114 Status fields Field System Name Firmware Version WAN Port MAC Address IP Address IP Subnet Mask DHCP LAN Port MAC Address IP Address IP Subnet Mask DHCP Description The System Name assigned to the firewall. The firewall firmware version. These parameters apply to the Internet (WAN) port of the firewall. The MAC address used by the Internet (WAN) port of the firewall. The IP address used by the Internet (WAN) port of the firewall. If no address is shown, the firewall cannot connect to the Internet. The IP Subnet Mask being used by the Internet (WAN) port of the firewall. The protocol on the WAN port used to obtain the WAN IP address. This field can show DHCP Client, Fixed IP, PPPoE, BPA or PPTP. For example, if set to Client, the firewall is configured to obtain an IP address dynamically from the ISP. These parameters apply to the Local (WAN) port of the firewall. The MAC address used by the LAN port of the firewall. The IP address used by the Local (LAN) port of the firewall. The default is 192.168.0.1 The IP Subnet Mask used by the Local (LAN) port of the firewall. The default is 255.255.255.0 Identifies if the firewall's built-in DHCP server is active for the LAN attached devices. 7-2 Maintenance 202-10098-01, April 2005