Netgear FVS114NA FVS114 Reference Manual - Page 77
Procedure to Con a Gateway-to-Gateway VPN Tunnel, VPN Wizard
![]() |
View all Netgear FVS114NA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 77 highlights
Reference Manual for the ProSafe VPN Firewall FVS114 Procedure to Configure a Gateway-to-Gateway VPN Tunnel Follow this procedure to configure a gateway-to-gateway VPN tunnel using the VPN Wizard. 1. Log in to the FVS114 on LAN A at its default LAN address of http://192.168.0.1 with its default user name of admin and password of password. Click the VPN Wizard link in the main menu to display this screen. Click Next to proceed. Figure 5-23: VPN Wizard start screen 2. Fill in the Connection Name and the pre-shared key, select the type of target end point, and click Next to proceed. Enter the new Connection Name: (GtoG in this example) Enter the pre-shared key: (12345678 in this example) Select the radio button: A remote VPN Gateway Figure 5-24: Connection Name and Remote IP Type Basic Virtual Private Networking 202-10098-01, April 2005 5-21
![](/manual_guide/products/netgear-fvs114-fvs114-reference-manual-5307826/77.png)