Netgear FVS114NA FVS114 Reference Manual - Page 81
VPN Status, Connect, VPN Status/Log screen
![]() |
View all Netgear FVS114NA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 81 highlights
Reference Manual for the ProSafe VPN Firewall FVS114 6. Repeat for the FVS114 on LAN B. Pay special attention and use the following network settings as appropriate. • WAN IP of the remote VPN gateway (e.g., 14.15.16.17) • LAN IP settings of the remote VPN gateway: - IP Address (e.g, 192.168.0.1) - Subnet Mask (e.g., 255.255.255.0) - Preshared Key (e.g., 12345678) 7. Use the VPN Status screen to activate the VPN tunnel by performing the following steps: Note: The VPN Status screen is only one of three ways to active a VPN tunnel. See "Activating a VPN Tunnel" on page 5-26 for information on the other ways. a. Open the FVS114 management interface and click on VPN Status under VPN to get the VPN Status/Log screen (Figure 5-30). Figure 5-30: VPN Status/Log screen b. Click on VPN Status (Figure 5-32) to get the Current VPN Tunnels (SAs) screen (Figure 5-31). Click on Connect for the VPN tunnel you want to activate. Basic Virtual Private Networking 202-10098-01, April 2005 5-25
![](/manual_guide/products/netgear-fvs114-fvs114-reference-manual-5307826/81.png)