Netgear FVS114NA FVS114 Reference Manual - Page 131
Using the LAN IP Setup Options, Configuring LAN TCP/IP Setup Parameters
View all Netgear FVS114NA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 131 highlights
Reference Manual for the ProSafe VPN Firewall FVS114 Note: If your ISP assigns a private WAN IP address such as 192.168.x.x or 10.x.x.x, the dynamic DNS service will not work because private addresses will not be routed on the Internet. Using the LAN IP Setup Options The LAN IP Setup menu allows configuration of LAN IP services such as DHCP and RIP. From the main menu of the browser interface, under Advanced, click on LAN IP Setup to view the menu shown below. Figure 8-3: LAN IP Setup Menu Configuring LAN TCP/IP Setup Parameters The firewall is shipped preconfigured to use private IP addresses on the LAN side, and to act as a DHCP server. The firewall's default LAN IP configuration is: • LAN IP addresses-192.168.0.1 • Subnet mask-255.255.255.0 Advanced Configuration 8-5 202-10098-01, April 2005