Netgear FVS318N FVS318 Reference Manual - Page 78
Vpnab, Lan_a - wan port down
View all Netgear FVS318N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 78 highlights
Reference Manual for the Model FVS318 Broadband ProSafe VPN Firewall b. For each FVS318, fill in the Connection Name VPN settings as illustrated above. • The Connection Names can be the same: VPNAB • Local IPSec Identifier name in the FVS318 on LAN A: LAN_A Note: The IPSec names must unique in this VPN network. • Local IPSec Identifier in the FVS318 on LAN B: LAN_B • Remote IPSec Identifier in the FVS318 on LAN A: LAN_B • Remote IPSec Identifier in the FVS318 on LAN B: LAN_A • Remote LAN IP Address in the FVS318 on LAN A: 192.168.0.1 and Remote Subnet Mask in the FVS318 on LAN A: 255.255.255.0 This is the LAN IP Address and Subnet Mask for the FVS318 on LAN B. Note: With these IP settings, using this VPN tunnel, you can connect to any device on LAN B. Alternatively, you can specify a single address, a subnet of local addresses, or a range of local addresses on LAN B which will limit the VPN tunnel to connecting to just those devices. For example, you can specify the IP address of a single address on LAN B and a Subnet Mask of 255.255.255.255 which will limit the VPN tunnel to connecting to just that device. • Remote LAN IP Address in the FVS318 on LAN B: 192.168.3.1 and Remote Subnet Mask in the FVS318 on LAN B: 255.255.255.0 This is the LAN IP Address for the FVS318 on LAN A. • Remote WAN IP Address in the FVS318 on LAN A: 10.0.0.1 This is the WAN IP Address for the FVS318 on LAN B. You can look up the WAN IP Address of the FVS318 on LAN B by viewing its WAN Status screen. When the FVS318 on LAN B is connected to the Internet, log in, go to its Maintenance menu Router Status link. If you find the WAN Port DHCP field says "DHCP Client" or "PPPOE," then it is a dynamic address. For a dynamic address, you would enter 0.0.0.0 in the configuration screen of the FVS318 on LAN A as the WAN IP Address for the FVS318 on LAN B. Alternatively, you could use the FQDN of the FVS318. Note: If one FVS318 has a dynamic IP address and you do not use FQDN, that FVS318 must always initiate the connection. • Remote WAN IP Address in the FVS318 on LAN B: 24.0.0.1 This is the WAN IP Address for the FVS318 on LAN A. c. Under Secure Association, select Main Mode and fill in the settings below. 6-14 M-10146-01 Virtual Private Networking