Netgear FVS318N FVS318 Reference Manual - Page 80
How to Con a Remote PC to Network VPN, FVS318 - vpn client software for windows 8
View all Netgear FVS318N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 80 highlights
Reference Manual for the Model FVS318 Broadband ProSafe VPN Firewall c. This will cause a continuous ping to be sent to the first FVS318. After between several seconds and two minutes, the ping response should change from "timed out" to "reply." Figure 6-11: Ping test results At this point the connection is established. Now that your VPN connection is working, whenever a PC on the second LAN needs to access an IP address on the first LAN, the Firewalls will automatically establish the connection. How to Configure a Remote PC to Network VPN This procedure describes linking a remote PC and a LAN. The LAN will connect to the Internet using an FVS318 with a fixed IP address. The PC can be connected to the Internet through dialup, cable or DSL modem, or other means, and we will assume it has a dynamically assigned IP address. The PC must have a VPN client program that supports IPSec. NETGEAR recommends and supports the SafeNet SoftRemote (or Soft-PK) Secure VPN Client for Windows. The SafeNet VPN Client can be purchased from SafeNet at http://www.safenet-inc.com. Note: If your situation is different, for example, if your remote PC is connected through a simple cable/DSL router, or if you wish to use different VPN client software, please refer to NETGEAR's web site for additional VPN applications information. FVS318 A 24.0.0.1 VPN Tunnel 192.168.3.1 Figure 6-12: Remote PC to Local LAN (A) configuration 6-16 M-10146-01 Virtual Private Networking