Netgear RAX36S User Manual - Page 15
Cable your router
View all Netgear RAX36S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
4-Stream AX3000 WiFi 6 Router Model RAX36S To wall-mount your router: 1. Drill holes in the wall where you want to wall-mount your router. 2. Insert wall anchors in the holes. 3. Insert screws into the wall anchors, leaving 3/16 inch (0.5 cm) of each screw exposed. 4. Align the router's wall-mounting holes with the screws and mount your router. Cable your router Power on your router and connect it to a modem. Figure 6. Cable your router To cable your router: 1. Unplug your modem, remove and reinsert the backup battery if it uses one, and then plug the modem back in. 2. Use the Ethernet cable to connect the modem to the yellow Internet port on the router. Note: If your Internet connection does not require a modem, connect your main Ethernet cable to the yellow Internet port on the router. 3. Connect the power adapter to your router and plug the power adapter into an outlet. The router's Power LED lights solid green when the router is ready. Hardware Setup 15 User Manual